Reverse Osmosis Water Filter Installation

Reverse Ozmosis Under Sink Filtration

The Original 7 Stage High Alkaline Magnesium & Hydrogen-Rich Undersink Reverse Osmosis Water Filter

Enjoy the pure, sweet taste of clean mineralised water on tap!
Designed with the health-conscious consumer in mind!
98% reduction of common tap water contaminants, tastes & odours such as chlorine, chloramine, pesticides, herbicides, heavy metals & fluoride.
Improve hydration, energy & muscle recovery with magnesium and potassium electrolytes.
Stop buying bottled water & save money!
Perfect for chlorinated town/mains Water.

Fully Installed (including GST) $1100

Price based on basic entry level chrome tap and available location to mount tap.

Some scenarios like under mount sinks and stone benchtops may require your main kitchen tap to be upgraded to a 3-way mixer tap which will provide your filtered water and unfiltered water in one tap. Please contact us to go through your setup and we will be able to advise on options.

3-Way Gooseneck Style Mixer (Chrome) $430

3-Way Gooseneck Style Mixer (Matte Black) $490

Stage 1: 5 Micron Polyspun Sediment Cartridge (GT2-2K)

Replace every 6 months

The first stage is a 5 Micron (uM) Sediment filter composed of 100% melt-blown polypropylene fibre. This cartridge helps to help protect the carbon pre-filters and reverse osmosis membrane from physical damage caused by particulate matter such as sand, dirt, silt, plant spores, and pollen. Physical contaminants such as these (which can surprisingly be found in most municipal water supplies), tend to clog up filter system components causing reduced water flow, lower osmotic pressure, diminished filtration efficiency, and ultimately, inferior water quality.

Stage 2: 5 Micron 100% Coconut Carbon Block Water Filter (GT4-7CTO)

Replace every 6 months

The second stage is a high-grade activated coconut carbon block pre-filter. The carbon block matrix enables maximum surface area and contact time, taking the first hit to absorb chemicals such as Chlorine (which causes damage to the membrane), along with other harmful organic chemicals and contaminants. Keeping up with regular maintenance of this pre-filter (changing it every 6 months) is crucial to protecting and extending the life of all filters that come after it.

Stage 3: 0.0001 Micron Asprinn 50 GPD Reverse Osmosis Membrane (GT36-59)

Replace every 2-4 years depending on water quality

The RO membrane is the “engine room” of your RO system. All the crucial work is done here, so all the filters before the membrane are primarily there to protect the membrane. This membrane has a 0.0001 Micron rating and can produce up to 190 Litres (50 Gallons) of water per day.

Stage 4: T300 Hydrogen-Rich High Alkaline Mineral Filter (GT6-32)

Replace every 12 months

This filter is the ultimate post RO filter on the market. It is one of the only alkalising filters in the world that can raise and retain a constant pH between 8.5 and 10.5* over a 12 month period and potentially longer. This unique cartridge is made up of pure sub-nanometer minerals and contains magnesium and potassium to provide superior pH stability in the high alkaline range. The media is agglutinated under high temperatures, whilst its anomalous surface enables greater surface area contact for the maximum level of mineralization.

The T300 filter also has the unique ability to produce hydrogen-antioxidants through the hydroxide-alkaline pH acidity balance of the magnesium & potassium media as it dissolves into the water. This high-quality, FDA Certified cartridge has multiple beneficial effects on drinking water.

Stage 5: Life Energy Ceramic (FAR Infrared) (GT6-10)

Replace every 2 years

Infrared beads are simply miraculous given that they don’t even come into contact with the water! Far Infrared Rays ionise and activate water molecules, and therefore may help improving blood circulation and overall health, given that water makes up over 70% of the mass of the human body. When FIR energy vibrates at a frequency similar to that of the human body, it may assist in activating cells, and strengthening the micro-circulatory system.

Stage 6: 100% Activated Coconut Carbon Filter (GT6-21)

Replace every 12 months

This filter ensures the maximum extraction of tastes and odours, whilst imparting a naturally “sweet” flavour into the water.

Stage 7: Inline Magnetic Water Conditioner

Never needs replacing

This inline magnetic water conditioner is designed to alter the structure of water by applying a strong magnetic field, helping to impart a negative charge to the water as it flows through. By influencing the arrangement of water molecules, it can reduce scale buildup, improve hydration, and support better absorption in both domestic and agricultural applications. Easy to install and maintenance-free, this non-chemical solution offers a continuous flow of conditioned water without altering its mineral content, making it ideal for users seeking the potential benefits of negatively charged water in a clean, efficient format.

Water Filter Replacement Schedule & Costs

Your water filtration system has 7 stages, and some parts need to be replaced regularly to keep everything working well.

Filter Replacements

Every 6 Months

Sediment Filter (GT2-2K) $16
Carbon Block Filter (GT4-7CTO) $25.50
Total $41.50

Every 12 Months

(Repeat the 6-month filters + the following)

Alkaline Mineral Filter (GT6-32) $120
Coconut Carbon Filter (GT6-21) $31
Total $192

Every 2 Years

(Do this along with the 12-month replacement)

Ceramic Infrared Filter (GT6-10) $40
Reverse Osmosis Membrane (GT13-59-ALP) $94

(may last up to 4 years depending on water quality)
Add-On Total $134

One Time Only

Magnetic Water Conditioner – No replacement needed.

Example Costs

End of Year 1 $234
End of Year 2 $368

(includes the 2-year filters)
Installation Fee $165

Per visit for filter replacement (Charged whenever we visit to replace filters)

Note: Prices may change based on supplier rates.