Whole House Water Filtration Installation
HP3 - 3 Stage Whole Home Filtration System
Featuring a sleek and industrially-designed 304 Brushed Stainless Steel Enclosure. 304 Stainless Steel is renowned for its strength and resistance to corrosion and oxidisation thanks to the tough composition of steel, nickel, and chromium alloy.
STAGE ONE
5 micron
Three Layer Gradient Polyspun Sediment Filter 5 Micron.
Removes:
- Sediment
- Rust
- Sand
- Silt
- Algae
STAGE TWO
20 micron
20micron Low Pressure Drop Carbon Block. Over 95% reduction of VOC’s (volatile organic compounds) as tested by WQA.
Removes:
- Herbicides
- Pesticides
- Chlorine
- Tastes and Odours
STAGE THREE
0.5 micron
Chloramines Reduction, 0.5 micron Composite Carbon Block
Effectively neutralises Chloramine and absorbs VOCS and DBPS in mains water.
Removes:
- Chloramine
- Heavy metals
Replacement Filter $350
Lifespan 12-18 months, DIY
Benefits
Better Skin
Better Hair
Better Clothing
Less Limescale Build Up
Less Plastic Waste
More Details
About Our Whole House Water Filtration System
Chromium, in particular, is what makes this 304 Stainless Steel housing truly stainless, as it prevents the formation of rust with an ultra-thin and strong layer of chromium molecules that protect the underlying steel structure.
The Triple Cartridge Design, based on our Full Sized 20″ x 4.5″ Reinforced UV Resistant “Big Blue” housings, gives you peak water flow and a long contact time for maximum impurity reduction, with the freedom to customize your selection of premium-grade Sediment, 100% Coconut Carbon Block and Hard Water Conditioning filters, which are certified to National Sanitation Foundation Standard No. 42. Pressure gauges also come standard with this system, to help you identify how your filters are going – simply mark the pressure level of each gauge upon installation. When you notice a significant drop in the level of pressure, this signals that your filter is starting to exhaust its capacity!
Technical Specs
- System Size Dimensions:
- Height: 74.5cm
- Width: 60cm
- Depth: 22 cm
- Filter Cartridge Size: 20″ x 4.5″
- Ports: 1″ Female BSP Inlet/Outlet Ports
- Pressure: 0 – 620 kPa
- Limit Pressure: ≤ 500 kPa
- Temperature: 0.5°C – 37.8°C
- Max Flow: 60 Ltrs/min (*System tested to 160 Ltrs/min. Maximum flow measured without cartridge. Refer to cartridge specs for flow rates.)
- Initial ΔP @ Flow: 10 kPa @ 57 Ltrs/min
